Hand control messages during normal operation.
Message Cause
No diode lit The vehicle's engine is switched on and/or the door is closed. Turny cannot be
manoeuvred.
Green LED blinks slowly Energy-saving mode.
Green LED lit Rotated inwards to end position. Turny is in a safe position for driving.
Green LED blinks Not rotated inwards to end position. Turny is not in a safe position for driving.
Red LED lit
Green LED blinks
End position reached and cannot be further lowered.
Red LED lit
Green LED blinks slowly
Has reached the end position and is in energy saving mode.
Turny
25
EN
Operation
To Next Page
Loading...