starts up automatic self-testing of the unit. All the display elements
appear for a brief moment.
After a few seconds the unit is ready to take off with the previous set-
tings from last time.
The lower bar displays the battery status.
The unit is equipped with two altimeters and . The
key allows you to switch between them.
Elevation above sea level
Reference height - can be reset to 0 by extended pressing of the
key. When switching to the flight duration appears for 5
seconds, followed again by the real time.
The keys are used to change the elevation or After
repeated pressing of ( SF=Special function) appears:
air pressure
temperature
This display complies with the QNH value. If the elevation is cor-
rectly set, then the air pressure at sea level and the temperature are
displayed. After 5 sec. the special functons display automatically returns
to and the time.
The temperature can be displayed either in °F or °C.
(Set Mode No. 7)
The altitude and variometer dimensions can be set in metric or impe-
rial values. (Set-Mode No. 8)
Only starting off
Altimeter
6
GB
To Next Page
Loading...
