❏❏
Read all assembly, operating, and safety instructions.
❏❏
Complete and return the warranty card to register your log splitter.
❏❏
Write the serial number and date-of-purchase in this manual.
❏❏
Assemble the log splitter.
❏❏
Fill the hydraulic tank with the recommended type and quantity of oil.
(See “Start-Up Procedure” section.)
❏❏
Fill the engine crankcase with the manufacturer’s recommended type
and quantity of oil. (See “Start-Up Procedure” section.)
❏❏
Fill the engine fuel tank with fresh, clean, lead-free gasoline. (Do not
mix oil with gasoline.)
❏❏
Bleed the air out of the cylinder before starting the log splitter. (See
“Start-Up Procedure” section.)
❏❏
Make sure the trailer hitch of the towing vehicle is equipped with a 2
inch ball.
Serial Number ______________
Date-of-Purchase ___________
Please enter the serial number and purchase
date of your log splitter in the space provided.
Keep this manual for future reference.
NOTE: Brave Products reserves the right to make technical changes for product
improvement. This manual may contain illustrations and photographs, for
demonstration purposes, which slightly deviate from the actual product design.
Initial Start-Up Instructions
To Next Page
