Braven BRV-1M - TURN ON & BLUETOOTH PAIRING; Powering On and Off; Activating Bluetooth on Device; Initiating Pairing Sound

3
ENG
TURN ON & BLUETOOTH PAIRING
1. Press the Power button for 2-3
seconds to turn on your BRAVEN
(BRV-1M). Press the same button
again for 2-3 seconds to turn your
BRAVEN off.
2. Activate Bluetooth
®
on the phone
or device you are pairing with (see
your device’s instruction manual
for information on activating its
Bluetooth
®
settings).
3. Press and hold the Play Button on
your BRAVEN until you hear the
BRAVEN pairing sound.
4. Go to your phone or device’s
Bluetooth
®
settings and select
“BRAVEN BRV-1M” from the list.
5. If asked for a
passcode enter
“0000”
Your BRAVEN will
remember the last 8
devices it has paired with.
NOTE: If your BRAVEN
does not have an active
Bluetooth
®
connection
and is left on, it will
shut itself o after 30
minutes. To restart your
BRAVEN you will need
to press and hold the
power button for 2-3
seconds.
EXTERNAL USB
CHARGING PORT
RESET BUTTON