To Next PageTo Next Page
Need help?Do you have a question about the Bravi Platforms Sprint LUI PK and is the answer not in the manual?
Provides an overview of the manual's purpose and scope for safe operation.
Explains safety symbols like Danger, Warning, and Attention for hazard identification.
Details essential precautions for correct and safe use and maintenance of the machine.
Covers operator training, comprehension, and essential steps before machine operation.
Outlines checks and verifications required for safe machine operation and functionality.
Details necessary precautions and checks for the operating environment before machine use.
Provides general information and safety instructions for operating the machine.
Details critical safety measures to prevent falling hazards while using the platform.
Specifies minimum safe operational distances from electrical hazards and related precautions.
Outlines precautions and conditions to prevent machine toppling and ensure stability.
Details safety measures to avoid crushing or impact injuries during operation and movement.
Provides guidelines for safe lifting, transport, and tie-down of the machine.
Defines requirements for operator training, supervision, and responsibility for safe use.
Provides information on machine inspection and maintenance procedures.
Lists essential inspections and checks to be performed before starting machine operation.
Details the comprehensive daily inspection process to ensure machine readiness and safety.
Lists specific checks and verifications required for all operations before each use.
Describes how to perform functional checks of machine systems from ground and platform controls.
Details the order picker's design, purpose, and key components for picking operations.
Explains preliminary operational conditions and how the machine's safety features work.
Provides instructions for removing and installing the transport platform boot.
Details the procedure for charging the machine's batteries, including safety precautions.
Explains the operation of controls and indicators on the platform command console.
Outlines necessary conditions and checks before activating the machine controls.
Explains the function of the key switch for platform, switch off, and ground command modes.
Describes the function and reset procedure for the platform emergency stop button.
Explains the role of left and right hand sensors in activating machine functions.
Details the operation of buttons for raising and lowering the cargo platform.
Explains how to activate the acoustic signal device when the machine is turned on.
Describes the buttons for raising and lowering the main platform, with safety notes.
Explains how to use the steering rocker switch with the left hand for directional control.
Explains the function and importance of foot switches for enabling machine functions.
Describes the slope alarm system, its activation, and limitations for the LUI PK model.
Details specific controls and safety precautions for the LUI MINI P.A. model.
Explains the button for releasing and engaging auto braking on the fixed castor system.
Describes the use of the pedal lever for pushing the machine in a straight line.
Details the operation of the lever for raising and lowering the cargo shelf.
Explains the functionality of the ground command panel for machine control and diagnostics.
Describes the LCD display on the LUI PK ground control station and its information.
Details the battery gauge display on the LUI PK basket control station and fault codes.
Shows the battery status display for the LUI MINI P.A. and notes on battery life.
Explains the function and operation of the manual descending emergency lever.
Details platform load capacities for operator, boot, and cargo, and maximum goods size.
Provides instructions for properly parking and securing the machine after use.
Details methods for transporting the machine by driving or using a forklift, and tie-down procedures.
Illustrates the locations of important warning and safety stickers on the machine.
Describes procedures for when the operator is unable to control the machine or the platform is locked.
Introduces information on machine operation, maintenance, and procedures for qualified personnel.
Provides detailed technical specifications for the LUI PK model, including dimensions, speeds, and capacities.
Provides detailed technical specifications for the LUI MINI P.A. model, including dimensions, speeds, and capacities.
Lists the weights of key components like batteries and boots for both LUI PK and LUI MINI P.A. models.
Details basic maintenance tasks that operators can perform, such as checking hydraulic oil and battery inspection.
Instructions for checking and topping up the hydraulic oil level, including oil type recommendations.
Procedures for inspecting battery terminals and water levels, including safety precautions.
Provides instructions for cleaning the machine, including control panels and walking surfaces.
A checklist for performing preliminary inspections before starting machine operation.
Checklist for daily inspections, covering manuals, safety stickers, basket, tires, and components.
Checklist for annual inspections, covering decals, platform rails, elevating system, and electrical components.
Lists error codes and their descriptions for the LUI PK model, aiding in troubleshooting.
Diagram illustrating the hydraulic system components and connections for the LUI PK model.
Diagram illustrating the hydraulic system components and connections for the LUI MINI P.A. model.
Detailed wiring diagram for the LUI PK model, showing component connections and wire sizes.
Detailed wiring diagram for the LUI MINI P.A. model, showing component connections.
Specifies the conditions under which electrical components are covered by the warranty.
Outlines the procedure for submitting and processing warranty claims, including notification requirements.
General| Brand | Bravi Platforms |
|---|---|
| Model | Sprint LUI PK |
| Category | Safety Equipment |
| Language | English |
