Need help?Do you have a question about the BRAVILOR BONAMAT b series and is the answer not in the manual?
General| Category | Coffee Maker |
|---|---|
| Brand | BRAVILOR BONAMAT |
| Model | b series |
| Voltage | 230V |
| Material | Stainless steel |
Choose the desired volume from the available options on the display.
Place filter paper and add coffee grounds to the brew basket.
Position brew basket and initiate the brewing process.
Monitor brewing, wait for completion, and dispense coffee.
The brewed coffee is ready for serving.
Remove brew baskets, lids, and drip tray for cleaning.
Wipe down the exterior surfaces of the brewing unit.
Apply recommended cleaning agent (5 g/l) for thorough cleaning.
Perform rinse cycles and reassemble all cleaned components.
Remove filter parts and prepare the machine for descaling.
Mix and add the descaling agent to the water tank.
Start the automatic descaling process via the control panel.
Perform rinse cycles to thoroughly flush the machine.
Clean the machine exterior and reassemble parts.
Connect power, fill water tank, and turn on the machine.
Select volume, prepare filter, and start the first brewing cycle.
Discard the water from the very first brewing operation.
Enter programming mode by pressing '< 5 sec.'.
Choose program parameters and modify their values.
Save the adjusted parameter settings.
Access advanced settings for principal users.
Adjust brew parameters like time, temperature, and volume.
Configure the machine based on local water hardness.
Configure system-wide settings like auto-off and language.
Machine displays specific error codes on the screen.
Consult the manual to understand and resolve error codes.
Perform a reset after addressing the cause of the error.
To Next Page