Need help?Do you have a question about the BRAVILOR BONAMAT Bolero Series and is the answer not in the manual?
General| Category | Brewing Systems |
|---|---|
| Brand | BRAVILOR BONAMAT |
| Water Connection | Yes |
| Power Supply | 220-240V, 50/60Hz |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Series | Bolero |
| Power Consumption | Varies by model |
| Material | Stainless steel |
| Model | Bolero 1, Bolero 2, Bolero XL |
Steps an engineer performs during installation.
Guidelines for selecting and using ingredients.
Procedure to remove the door safety switch.
Steps to remove the HMI board service panel for specific models.
Steps to remove the HMI board service panel for specific models.
Detailed steps for removing the fan motor.
Procedure for removing the mixer motor.
Steps to remove the canister motor.
How to remove the I/O board for specific models.
Procedure for removing the inlet valve.
How to reset temperature safety switches for specific models.
How to reset temperature safety switches for specific models.
Steps to remove the temperature sensor.
Procedure for removing the boiler.
Steps to remove the pump float tank.
Procedure for removing the water selector.
List of warning codes, their descriptions, and actions.
List of error codes, detected issues, and suspected components.
Troubleshooting guide for common user-reported problems.
Troubleshooting guide for problems typically handled by dealers.
How to stop the descaling process.
The master PIN code for overriding settings.
Procedure for saving machine settings and exporting them to a file.
Procedure for importing settings from a file and saving them as default.
Steps to reset the machine's beverage counter.
Information about the MDB service set for connectivity.
Steps to install the MDB service set on Bolero 11 and 12.
Steps to install the MDB service set on Bolero 32, 33, 42, and 43.
Procedure for installing the cold water conversion kit.
Overview of general volume ranges for different Bolero models.
Configuration and available beverages for Bolero 11 (3kw).
Configuration and available beverages for Bolero 21 (3kw).
Configuration and available beverages for Bolero 32 and 33.
Configuration and available beverages for Bolero 42 and 43.
Comprehensive list of available beverages and their codes.
Steps to build a recipe with one ingredient.
Steps to build a recipe with two ingredients.
Steps to build a recipe with three ingredients and two sequences.
Steps to build a recipe with two ingredients and two sequences.
Steps to build a recipe with three ingredients and three sequences.
Information on locating the appliance's identification plate.
Procedure for replacing the HMI board and updating software.
To Next Page