Bray Flow-Tek Triad Series - Troubleshooting

TRIAD SERIES 3-PIECE BALL VALVE
Installation, Operation, and Maintenance Manual
 of ©  BRAY INTERNATIONAL INC ALL RIGHTS RESERVED BRAYCOM The Information
contained herein shall not be copied transferred conveyed or displayed in any manner that would
violate its proprietary nature without the express written permission of Bray International Inc
NOTES
 Bray does not accept any responsibility for the product if wear parts not tested and approved by Bray are used
 Bray does not accept any responsibility for the product if maintenance instructions are not followed during maintenance
 TROUBLESHOOTING
TROUBLE POSSIBLE CAUSE SOLUTION
Packing Leakage Packing Consolidation
Packing Wear
Improper Repair
Tighten gland bolting or lock nut
to eliminate leak If leak continuous
follow proper maintenance and
repair
Seat Leakage Seat Wear
Media Damage
Improper Repair
Follow proper maintenance and
repair
Body Seal Leakage Improper installation or welding technique
Improper Repair
Tighten body bolts per Table 
following tightening technique
outline in valve assembly section
If leak continues follow proper
maintenance and repair