EasyManua.ls Logo

Bray Flow-Tek Triad Series - Safety Information; 3.1 Protective Clothing

Default Icon
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TRIAD SERIES 3-PIECE BALL VALVE
Installation, Operation, and Maintenance Manual
 of ©  BRAY INTERNATIONAL INC ALL RIGHTS RESERVED BRAYCOM The Information
contained herein shall not be copied transferred conveyed or displayed in any manner that would
violate its proprietary nature without the express written permission of Bray International Inc
 SAFETY INFORMATION
NOTICE
Failure to follow these procedures could aect product
warranty
Read completely and understand all instructions provided prior
to beginning installation or maintenance
Follow all instructions as described using the correct tools for the
job
Before installing this equipment confirm that it is suitable for the
intended service The identifications tags describe the maximum
allowable service conditions for this product
Be sure that the installation is protected by appropriate pressure
control and safety devices to ensure that acceptable limits are
not exceeded
WARNING
Prior to servicing remove actuation media and power and
confirm there is no stored energy in the actuation such as
compressed springs or trapped air before beginning service
Stored energy devices can cause serious injury if the energy is
released without warning
Confirm that line pressure has been removed and that there is no
pressure trapped within the valve prior to beginning service Do
not attempt to remove any packing components or other fittings
before confirming that pressure has been completely removed!
Do not begin service work without proper tools and protective
safety measures
The work area should be clear of obstructions and other safety
hazards
 Protective Clothing
Bray products are often used in critical applications (eg under
extremely high pressures with dangerous toxic or corrosive
mediums) When performing service inspection or repair
operations always ensure that the valve and the actuator are
depressurized the valve has been cleaned and the valve is free
of harmful substances In such cases pay particular attention
to personal protection (eg protective clothing gloves glasses
etc)

Other manuals for Bray Flow-Tek Triad Series