BRAYER BR2400 - Page 8

8
EN
the button to switch the necessary operation mode on,
each touch of the button is accompanied by a sound
signal.
DELAYED START FUNCTION
The «Delayed Start» function allows you to set the
time, after which the chosen cooking program will
start.
• Choose a program using the «Menu» button.
• To set the «Delayed Start» function, press the «Delay»
button for a long time.
• Set the required value of the delayed start time, in the
range of 1-24 hours. Press «Delay» until you hear the
sound signal for the second time, set the minutes.
• Press «Delay» until you hear the sound signal for the
third time, set the required temperature in the range of
30-160 ° С
• Press the «Start» button.
• The delayed start time counts down on the display. At
the end of the delayed start time, the cooking process
will start.
FOOD COOKING PROGRAMS
• By pressing the «Program» button (12), you can
choose a cooking program, and the symbols «Fish»,
«Fry», «Cake», «Simmer», «Rice», «Soup», «Steam»,
«Stew», «Porridge», «Meat», «Yogurt», «Jam» will light
up and will be ashing on the display.
• After choosing the cooking program and pressing the
«Start» button, the multicooker will turn on in 5 seconds.
«Fish» program
• The «Fish» cooking program is used to prepare sh and
sh broth.
• Place the sh into the bowl (6) and add the required
quantity of water.
• Place the lid (5) in the initial place of installation, turn the
lid (5) counterclockwise until bumping.
• Check that the pressure limiting valve (3) is in the
«Closed» position, if it is in the «Open» position, turn it
clockwise or counterclockwise.
• Install the power cord into the socket on the multicooker
body (9).
• Plug the power cord (22) into the power outlet.
• By pressing the «
» button (12) choose the «Fish»
cooking program, and the «Fish» symbol will be ashing
on the display.
• The default pressure holding time is 5 minutes, you can
change the pressure holding time by pressing the «
» buttons (14), the pressure holding time should
be tailored to your needs.
• In 5 seconds, the multicooker will turn on in the «Fish»
cooking program.
• Press the «Keep warm/Cancel» button (13) to turn o󰀨
the program «Fish».