BRAYER BR2402 - Page 14

14
EN
Setting the cooking time
• You can set the cooking time for each program except
«Rice and u󰀨y porridges cooking program» « «. The
setting step and the possible time setting range depend
on the selected cooking program (see the Automatic
cooking program table).
1. To set the cooking time after selecting the program,
press the cooking time setting button (14) «
», the
display (13) will show the ashing digital values of the time
in «hours».
2. Set the desired time in «hours» by pressing the buttons
(16) «+» and (17) «-». To quickly change the readings,
press and hold the necessary button (16 or 17).
3. To save the changes and switch to setting the minutes,
press the button (14) «
».
4. Set the time in «minutes» in similar fashion. Do not
press the buttons on the control panel (2) for a few
seconds, the changes will be saved automatically, the
digital symbols on the display (13) will glow constantly.
5. To return to setting time in «hours», press again the
button (14) «
».
COOKING PROGRAMS
«Multicook» program: setting the cooking temperature
before the program start
• In the «Multicook» program you can set not only
cooking time but the cooking temperature as well,
before the program start. Possible temperature range is
from 35 °C to 180 °C with the step 5 °C.
1. After selecting the «Multicook» program press the button
(9) «
». Default digital temperature value will be ashing on
the display (13).
2. Set the desired temperature by pressing the buttons (16)
«+» or (17) «-». To quickly change the value press and hold
the corresponding button (16) «+» or (17) «-».
3. Do not press any buttons on the control panels for a
few seconds, the changes will be saved automatically, and
the digital temperature symbols will glow constantly on the
display (13).
Note: to prevent the multicooker from overheating, the
maximal operation time of cooking programs at the
temperature exceeding 150°C will be limited to 2 hours.
Setting the delayed start time
• The «delayed start» function allows to set the cooking
program start time.
• 1. After selecting the cooking program, press the button
(12) «
», while the delayed start indicator (20) « » will
light up, the digital symbols of the time «hours» will ash
on the display (13).
• 2. Set the desired time in «hours» by pressing the
buttons (16) «+» and (17) «-». To quickly change the
readings, press and hold the necessary button (16 or
17).
• 3. To save the changes and switch to the minutes
setting, press the button (12) «
».