BRAYER BR2402 - Page 15

15
EN
• 4. Set the time in «minutes» in similar fashion. Do not
press the buttons on the control panel (2) for a few
seconds, the changes will be saved automatically, the
digital symbols on the display (13) will glow constantly.
• 5. To return to the «hours» setting, press again the
button (12) «
».
Note: the delayed start function is not available in some
programs (see the Automatic cooking program table).
• During the «delayed start» function operation the
following indicators glow: - delayed star (20) «
»,
selected cooking program (21-30), the buttons (11) «
»
and (15) «
». If the auto-heating function is active, the
indicator (19) «
» glows.
• During the «delayed start» function operation the
delayed start time is shown on the display (13). Press
the button (12) «
», the display (13) will be showing
the cooking program operation time for 5 seconds.
• At the end of the «delayed start» function, the indicator
(20) «
» will go out, the cooking program will start.
• Do not use the «delayed start» function, if the recipe
contains
• perishable foods (eggs, fresh milk, meat, cheese etc.).
Changing the temperature and time during the
cooking program operation
• Using this function, you can change the cooking
program settings during cooking.
• Soup or milk porridge boils over? Steamed vegetables
take too long? Change the temperature or cooking time
without interrupting the program, as if you are cooking
on the stove or in the oven.
• You can change the cooking time and temperature
during any automatic cooking program, except for the
«rice and u󰀨y porridges» program.
Changing the temperature during the cooking program
operation
• You can change the cooking temperature within the
range from 35°C to 180°C with the step 5°C.
1. During the cooking program operation press the button
(9) «
», the display (13) will show ashing digital symbols
of the default temperature.
2. Set the desired temperature by pressing the buttons
(16) «+» or (17) «-». To quickly change the value press
and hold the corresponding button (16) «+» or (17) «-».
3. Do not press any buttons on the control panels for a
few seconds, the changes will be saved automatically, and
the digital temperature symbols will glow constantly on the
display (13).
Note: to prevent the multicooker from overheating, the
maximal operation time of cooking programs at the
temperature exceeding 150°C will be limited to 2 hours.
Changing the time during the cooking program
operation
• The range and the setting step for changing the cooking
time depend on the selected cooking program (see the
Automatic cooking program table).