BRAYER BR2402 - Page 16

16
EN
1. During the program operation press the button (14) «
», the digital time values in «hours» will be ashing on the
display (13).
2. Set the desired time in «hours» by pressing the buttons
(16) «+» and (17) «-». To quickly change the readings,
press and hold the necessary button (16 or 17).
3. To save the changes and switch to setting the minutes,
press the button (14) «
».
4. Set the time in «minutes» in similar fashion. Do not
press the buttons on the control panel (2) for a few
seconds, the changes will be saved automatically, the
digital symbols on the display (13) will glow constantly.
5. To return to the «hours» setting, press again the button
(14) «
».
6. If you set the cooking time «00:00», the program
operation will be stopped.
• During the «delayed start» and «rice and u󰀨y
porridges» program operation the time and temperature
changing functions are not available.
• If you change the temperature or the cooking time
during reaching the operating parameters (if it is
provided by the factory settings), the pre-heating
process will be interrupted, the countdown of the
program time will begin.
Auto-heating (maintaining the temperature of cooked
dishes)
• This function switches on automatically right after the
cooking program is nished
• and can maintain the temperature of the ready dish
within the range 70-75°С up to 12 hours. When the
auto-heating function is operating, the indicator (19) «
» and the button (11) « » indicator glow, the display (13)
shows the minute-by-minute countdown of the operating
time in this mode.
• To switch the auto-heating function o󰀨, press and hold
the button (11) « », the multicooker will switch to the
standby mode.
• The auto-heating function is disabled in some cooking
programs (see the Automatic cooking program table).
Preliminary disabling of auto-heating
• Switching the auto-heating function on at the end of the
cooking program is not always desirable, taking this into
account, the multicooker allows to preliminary disable the
auto-heating function.
• To switch the auto-heating o󰀨, press the button (15) «
»
during the cooking program operation, the indicator (19)
«
» will go out. To switch the auto-heating on again,
press the button (15) «
» again.
• If the cooking temperature is set below 80°C, auto-
heating will be automatically disabled, if during the setting
of the cooking program, the cooking temperature is set
above 80°C, auto-heating will automatically switch on.