22
• Do not leave the bowl (8) with food in the multicooker for
more than 24 hours. You can store the bowl (8) with the
ready dish in the refrigerator and, if necessary, heat up
the food in the multicooker using the reheating function.
• If you don’t use the multicooker for a long period of time,
unplug it.
• The process chamber, the heating element, the bowl (8),
the drip container located on the back of the multicooker
body and the removable steam valve must be clean and
dry.
DO NOT immerse the multicooker body (1) and the power
cord (35) into water or rinse them under a water jet!
DO NOT use coarse napkins or any abrasives for cleaning
the multicooker. Do not use chemicals that are not
recommended for use on items that come into contact with
food for cleaning the multicooker.
• Be careful when cleaning the gasket on the inner lid of
the multicooker, damage to the gasket will cause the
multicooker to malfunction.
Cleaning the multicooker body
• Clean the multicooker (1) body with a soft, slightly damp
cloth as ait gets dirty. You can use a small amount of
neutral detergent, then wipe the body with a damp cloth
and dry it.
Cleaning the removable inner lid
• It is recommended to clean the removable inner lid and
the gasket after
• every use of the multicooker.
• Press the button (3) and open the lid (4).
• Press on the lock and remove the inner lid (pic. 1),
remove the gasket.
• Wash the inner lid and the gasket (pic. 2).
• Put the gasket on the inner lid.
• Install the inner lid back to its place (pic. 3).
• Press on the inner lid until the lock clicking (pic. 4).
ATTENTION! Be careful when cleaning the gasket, its
deformation will lead to failure of the device.
Cleaning the removable steam valve
• Wash the removable steam valve after every use.
1. Remove the steam valve (5) (pic. 5).
2. Disassemble the steam valve (5) (pic. 6, 7). Rinse the
valve parts under running water, dry the parts before
reassembling.
3. Assemble the valve (5) (pic. 8).
4. Install the steam valve (5) back to its place (pic. 9).
Cleaning the bowl
• Clean the bowl (8) after every use. You can wash
the bowl by hand using a soft sponge and neutral
detergent, or in the dishwasher (according to the
manufacturer’s recommendations).
• If the bowl (8) is very dirty, pour some warm water
into the bowl and leave it to soak for some time, then
clean it.
• Always wipe the outer surface of the bowl (8) dry
before installing it back into the multicooker.
To Next Page
Loading...
