BreathableBaby Breathable Mesh Mini Crib User Manual

Breathable™ Mesh Mini Crib
Customer Care:
Email: CustomerCare@BreathableBaby.com
Style #:
Lot:
Date:
_______ ____
___________
BreathableBaby, LLC.
2481 Hedberg Drive
Minnetonka, MN 55305
Phone: 877-827-4442
This product is not intended for institutional or commercial use.
Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.
ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly,
keep out of reach of children until assembly is complete.
©2019 BreathableBaby, LLC
MM/YYYY
50118
PO #
Ages 0–24 months
(or 35" tall)
To register your product for important safety alerts and updates to your product please visit
BreathableBaby.com/Registration
Please do not return this item to the store before contacting us about missing parts or with any questions.
Care and Cleaning:
Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning.
Clean wood or mesh with mild soap on a soft rag. Wipe again with clean water
and let dry thoroughly.
If you ever refinish this furniture, be sure to use only a non-toxic finish specified for children’s products.
As with all your fine furniture, blot up spills immediately.
If optional legs are not used, use pad underneath crib to prevent scratches to floor.

BreathableBaby Breathable Mesh Mini Crib Specifications

General

Product Type	Mini Crib
Material	Mesh
Weight Limit	50 pounds
Breathable	Yes
Color	White
Age Range	0-24 months
Assembly Required	Yes
Features	Breathable mesh sides

Summary

Customer Care and Product Information

Contact and Registration Details

Provides email, phone number, address for customer support, and website for product registration.

General Safety Warnings

Suffocation Hazard Precautions

Details risks of suffocation from padding, bedding, and improper mattress use.

Fall Hazard Precautions

Outlines risks of falls, entrapment, and strangulation from climbing, cords, and loose parts.

Assembly Instructions Overview

Mattress Platform Positions

Explains the use of the mattress at the upper and lower levels based on infant development.

Parts and Tools

Parts List Part 1

Identifies major components of the mini crib including rails, ends, and mattress base.

Tools and Assembly Advice

Recommends using the provided Allen wrench and avoiding power screwdrivers.

Parts List Part 2

Hardware and Accessories

Lists all necessary bolts, washers, brackets, mattress pad, and sheet for assembly.

Assembly Steps

Step 1: Attaching Side Rails and Ends

Connects mesh rails and solid ends using bolts and lock washers, with specific panel orientation guidance.

Step 2A: Upper Level Mattress Platform

Installs L-brackets for the upper mattress position and includes a warning to move to the lower level.

Step 2B: Lower Level Mattress Platform

Installs L-brackets for the lower mattress position and warns to discontinue use at 35 inches.

Step 3: Attaching the Mattress Base

Secures the mattress base to the L-brackets, emphasizing firm attachment at all corners.

Step 4: Optional Leg Attachment

Attaches the optional legs to the solid ends, advising on slant direction and safe storage of parts.

Lowering Mattress Platform

Details the process of moving the mattress to the lower position, including bracket and base re-attachment.

Final Instructions

Storage and Future Use

Instructs to keep instructions for future use and return them to the storage envelope.