TENDING
Every component on your new Breeo X Series smokeless fire pit is built to last. You
can leave your X Series fire pit out in the elements year-round without worry and with
minimal care. But of course, the more you use your X Series fire pit, the more ash will
build up in the bottom. From time to time, you’ll want to scoop out debris to keep your
X Series fire pit performing at its best. And remember: always remove the ashes from
your X Series fire pit before long-term storage.
CORTEN FINISH
Corten is a steel alloy that looks
better with age—and without much
upkeep. The Corten finish on your
X Series fire pit requires nothing
more than the occasional
spot-cleaning with a dry wire brush
or damp cloth.
STAINLESS STEEL
We use grade 304 stainless steel
for rugged good looks and ultra-low
maintenance. But occasionally, you
might want to clean the stainless
steel components of your X Series
fire pit. We recommend your
favorite stainless steel cleaner
and a soft cloth.
1
2
REMOVE YOUR
FIRE PIT
Remove your fire pit
from the box.
We recommend 3-4 people
lift for placement.
PLACE YOUR
FIRE PIT
Always place your Breeo
X Series
®
fire pit on a level,
fireproof surface such as
rock, stone, or dirt.
Never use your X Series on
wooden or composite decks,
stamped concrete or any
heat sensitve surfaces.
3
SETTING UP
To Next Page
Loading...
