Labelling 15Ibis PowerDrive
1
2
3
4
5
6
7
8
9 Labelling
9.1 Markings on the wheelchair
Note!
Never remove or cover up the markings,
symbolsandinstructionsaxedtothe
wheelchair. These safety features must
remain present and clearly legible throughout
the entire lifespan of the wheelchair.
Replace or repair any markings, symbols
or instructions that have become illegible or
damaged immediately. Please contact your
dealer for assistance.
Markingsusedonthewheelchair(gure8):
1. Check manual before using
2. Freewheel switch in ‘Drive’ mode. Freewheel
switch in ‘Push’ mode. Never set the
freewheel switch to ‘Push’ mode while the
wheelchair is on a slope.
3. Battery charging connection
4. Attachment point for the tie-down system for
transportation in a vehicle.
5. Risk of breakage! Use caution when
swinging the controller aside in order to
avoid anything becoming trapped.
6. Riskofpinching.Keephandsandngers
clear of the moving parts when adjusting the
height and/or when adjusting the tilt of the
wheelchair.
7. Identicationplate
A. Model
B. Year of manufacture
C. Identicationnumber
D. Indoor or outdoor use
E. CE mark
F. Maximum load in kg