Breg Polar Care Wave - User Manual

Questions and Answers

B
Brittany DavisJul 28, 2025
Why is my Breg Polar Care Wave Personal Care Products cold compression pad not cold or water not flowing?
- J
  Jonathan ScottJul 28, 2025
  If the Breg Personal Care Products cold compression pad isn't getting cold or water isn't flowing, first, ensure the on/off button is lit and a cold therapy setting is active. Check that the blue connectors are correctly aligned and fully engaged. Give the pad 10 minutes to reach a stable temperature. Make sure the unit has enough ice and water. For colder settings when using Breg Ice Bags, add cubed ice up to the ice fill line. Elevating the unit can help water flow. Also, make sure the tubing isn't kinked. You might also try removing the pad, letting it fill with water, and then reapplying it.
H
hudsonthomasAug 1, 2025
What to do if Breg Polar Care Wave compression pad is not compressing or filling with air?
- J
  Jessica RichardAug 1, 2025
  If your Breg Personal Care Products compression pad isn't compressing or filling with air, ensure the on/off button is lit and a compression therapy setting is active. Verify that the blue connectors are correctly aligned and fully engaged. Tighten the cold compression pad and check that the tubing isn't kinked. You might also try removing the pad, letting it inflate with air, and then reapplying it.
C
Carol RiveraAug 6, 2025
What to do if the Breg Polar Care Wave Personal Care Products on/off button is flashing?
- C
  colin61Aug 6, 2025
  If the on/off button on your Breg Personal Care Products is flashing, try restarting the unit. Turn it off by pressing the on/off button or by disconnecting and reconnecting the power supply. Then, press the on/off button again to turn the unit back on and select your desired therapies. If compression therapy does not function after pressing compression button see Compression Therapy troubleshooting sections. If cold therapy does not function after pressing cold button, see Cold Therapy troubleshooting section.
C
Chad OrtizAug 10, 2025
How to fix Breg Personal Care Products unit leaking from blue connectors?
- J
  Jake LambertAug 10, 2025
  If your Breg Personal Care Products unit is leaking from the blue connectors, start by disconnecting the blue tabs on the cold compression pad connector. Then, ensure the Breg logos on the blue connectors are correctly lined up before reconnecting them.
A
Andrea MoranAug 14, 2025
Why is my Breg Personal Care Products compression pad not deflating properly?
- A
  Anna DayAug 15, 2025
  If your Breg Personal Care Products compression pad isn't deflating properly, first check that the blue connectors between the cold compression pad and tubing are fully engaged with the Breg logos lined up. If that doesn't work, disconnect the blue connectors, deflate the pad by rolling it to remove air, and then reconnect the blue connectors if needed.
T
tharringtonAug 19, 2025
What to do if the Breg Polar Care Wave Personal Care Products on/off button isn’t responding?
- W
  William SanchezSep 12, 2025
  If the on/off button on your Breg Personal Care Products isn’t responding, first, confirm that the power outlet is working and the power supply is fully inserted. Next, check that the power supply plug is fully inserted into the unit lid. Also, make sure the correct Polar Care Wave power supply is connected.
C
Christine HerreraAug 23, 2025
How to prevent condensation on Breg Personal Care Products?
- J
  Jason BanksAug 23, 2025
  To minimize condensation with your Breg Personal Care Products, loosely wrap material over the cold compression pad and tubing to reduce air exposure. Protect the wound site with a sterile dressing that has a waterproof barrier. Place a cloth layer under the container to protect items under the unit.

Summary

Indications and Contraindications

Indications for Use

Details the intended uses of the Polar Care Wave system for treating post-surgical and acute injuries.

Contraindications

Lists pre-existing conditions and risk factors that prohibit or require caution when using the Polar Care Wave system.

Symbols Key

Label Symbols

Explains the meaning of various safety and operational symbols used in the manual.

Keypad Symbols

Details the function of each button on the Polar Care Wave unit's keypad.

Polar Care Wave Description

Unit Overview

Describes the Polar Care Wave as a motorized cold therapy and intermittent compression device.

Included Items

Lists the components that come with the Polar Care Wave unit.

Accessories

Lists optional accessories available for purchase for the Polar Care Wave system.

Warnings

General Warnings

Provides crucial safety information and precautions for using the Polar Care Wave system.

Skin Inspection

Instructs users to regularly check the skin under the compression pad for adverse reactions.

General Safety Precautions

Outlines essential safety measures for operating and maintaining the Polar Care Wave unit.

User Notices and Reporting

Advises users on critical safety notices and how to report serious incidents.

Cold Compression Pad Warnings

Highlights precautions when using cold compression pads, including sterility and application over wounds.

Cold Therapy Warnings

Details risks and risk mitigation strategies specific to cold therapy application.

Compression Therapy Warnings

Outlines risks and risk mitigation strategies specific to compression therapy application.

Cautions

Lists important cautions and potential hazards to be aware of during use.

Operating Instructions

Setup with Water and Ice

Step-by-step guide on preparing the unit with water and ice for operation.

Setup with Breg Ice Bag Accessories and Water

Instructions for using Breg Ice Bags as an alternative to ice and water for cooling.

Power Supply Connection

Details how to connect the power supply to the unit and wall outlet.

Cold compression Pad Application

Illustrates how to correctly apply various cold compression pads to different body parts.

Connecting and Disconnecting Cold compression Pad to Unit

Explains how to attach and detach the cold compression pad from the main unit.

Power Adapter Assembly

Guides on attaching the correct plug adapter to the power supply for different regions.

Keypad Operation

Explains the functions of the buttons on the Polar Care Wave unit's control panel.

Operating the Unit

Step-by-step instructions on turning the unit on, selecting settings, and operating therapies.

Cleaning

Exterior Surfaces Cleaning

Procedures for cleaning the unit's exterior parts like the container, lid, and pads.

Internal Components Cleaning

Instructions for cleaning the internal components using water and bleach solution.

Storage

Storing the Unit

Steps for properly storing the Polar Care Wave unit when not in use, including draining and coiling.

Product Part Numbers and Warranty

Product Part Numbers

Lists the product codes and descriptions for the Polar Care Wave and its accessories.

Warranty Information

Details the warranty period and terms for the Polar Care Wave unit.

Troubleshooting Guide

On;off Button Flashing Notification

Troubleshooting steps for when the unit's on/off button is flashing.

Unresponsive On;off Button

Solutions for issues where the unit's on/off button is unresponsive.

Condensation Management

Addresses condensation on tubes and pads, and how to manage it.

Leaking from Blue Connectors

Troubleshooting steps for leaks originating from the blue connectors.

Cold Therapy Flow Issues

Diagnoses and resolves issues with cold therapy flow or lack of cooling.

Compression Pad Inflation Problems

Troubleshooting steps for compression therapy where the pad does not inflate or deflate correctly.

Compression Pad Deflation Issues

Provides solutions for when the cold compression pad fails to deflate after inflation.

Product Specifications

Electrical Specifications

Details the unit's electrical ratings, manufacturer, and compliance standards.

Environmental Requirements

Specifies the environmental conditions for transport, storage, and operation.

Performance Specifications

Outlines the expected service life and operational temperatures of the unit and pads.

Physical Specifications

Provides physical details of the unit, including weight and dimensions.

Electromagnetic Immunity

Lists test results for electromagnetic compatibility based on EMC standards.

Electrical Safety

Flammables and Electrical Components

Advises on avoiding flammables and keeping electrical parts dry and clean.

Power Supply Safety

Highlights precautions related to the power supply, cord, and potential electric shock.

Electromagnetic Interference and Emissions

Warns about potential interference with other devices and using unapproved accessories.

Discharge Reminders for Healthcare Professionals

Patient Screening and Instructions

Reminders for healthcare professionals to screen patients and provide clear usage instructions.

Prescription and Injury Potential

Emphasizes the need for a proper prescription and informing patients about injury risks.

Pad Application and Skin Inspection

Guidance on correct pad application, skin checks, and what to do for adverse reactions.

Documentation and Protocol

Ensures proper documentation of the prescription and provides a template for the cold compression protocol.

Cold Compression Protocol

Protocol Template

A fillable template for healthcare professionals to document treatment parameters for the patient.

Discuss Treatment with Healthcare Professional

Advises patients to discuss potential adverse reactions with their doctor.

Use Only As Prescribed

Reinforces the importance of following the physician's prescribed protocol and instructions.

Inspect Skin Regularly

Reiterates the need for frequent skin checks to prevent injury.

Breg Polar Care Wave Specifications

General

Product Type	Cold and Compression Therapy System
Power Source	AC Adapter
Category	Personal Care Products
Therapy Type	Cold and Compression
Compression Settings	Adjustable
Usage	Post-operative recovery, Pain management

Related product manuals

Breg SlingShot 3

2 pages