Breg VPULSE - Operating Instructions: Ice and Water

9
of 22
Operating Instructions
Using the System with Ice and Water
Pour cold
water into the
container to
the “WATER”
level indication
on the inside of
the container.
Remove the two
Ice Bottles from
the container.
Pour ice water into
the container until
even with the “ICE”
level indication on
the inside of the
container.
Place the lid onto the
container and turn
clockwise until the
handle clicks into
position.
1 2
3 4
Every VPULSE is quality tested before being sold. When un-packing your new system, it is
normal to find moisture in the VPULSE water reservoir due to the testing.
DO NOT overfill.
DO NOT operate without water.
DO NOT operate with hot water.