Breitling AEROSPACE B70 - LAPE TIME; Split-time

AEROSPACE
CHRONOMETER
A
C
B
CHR LP
MM:SS:ZZ
40 41
LAPE TIME
Browse through the dierent functions until the upper
display shows [CHR LP].
The lap-time function enables you to calculate the time
between two split measurements while your chronograph
continues running. Each split measurement, therefore,
counts back to the last split measurement done.
In a race, if you mark a split time at each lap, this helps you
understand how fast you were during each lap and overall
if you are getting faster or slower. In the meantime, the
clock continues timing the overall race.
Usage
Standard
• Press A to start.
• Press A to stop. The lower display will show the time [MM:SS:ZZ].
• Press C to restart.
Split-time
• Press A to start.
• Press C to mark a lap time.
• The upper display will show [CHR 1], which corresponds to your first lap
time measurement.
• The lower display will flash the corresponding lap time [MM:SS:ZZ]
4 times and then go back to the standard display of the chronograph,
which continued running in the background.
• Press A to stop. The lower display will show the final time [MM:SS:ZZ].
• Press B to restart.
Nota bene
M for minutes / S for seconds / Z for 100
th
of seconds