Breitling NAVITIMER WORLD User Manual

1514
USING THE CHRONOGRAPH
I. M
EASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 3
shows the measurement in seconds.
2. Stop the measurement by pressing pushpiece A once
more. t he measurement is done in hours (totalizer 1),
minutes (totalizer 2), seconds and
1/4ths of a second (hand 3).
3. r eturn the chronograph to zero by pressing push-
piece B.
6



2
10
8
Chronometre
Navitimer
4
2
4
6



4
2
4
6



PREPARING THE WATCH FOR USE
WINDING – TIME-SETTING
Nota bene: mechanical watches endowed with a date, day,
month or moon-phase indicator are equipped with a complex
mechanism that is set into motion between 8 pm and 3 am. It is
therefore vital to avoid adjusting the calendar or moving the
time backwards during this period.
1. Wind the watch by 40 clockwise turns of the crown.
2. Pull the crown out to positio
n 2, turn it clockwise to
adjust the calendar to the day prior to the date when
it is set into operation.
3. Pull the crown out to position 3. t urn the hands so as
to make the calendar jump once when the hands pass
through midnight. t hen adjust the hour and minute.
4. Push the crown back in to position 1.

Breitling NAVITIMER WORLD Specifications

General

Brand	Breitling
Model	NAVITIMER WORLD
Case Material	Stainless Steel
Case Diameter	46 mm
Movement	Breitling Caliber 24
Power Reserve	Approximately 42 hours
Crystal	Cambered sapphire, glareproofed both sides
Bezel	Bidirectional, slide rule
Strap/Bracelet	Leather strap or stainless steel bracelet
Water Resistance	30 meters (100 feet)
Dial	Black, Blue, Silver
Functions	Chronograph, GMT, Date display