12 13
SPECIAL CHARACTERISTICS
BIDIRECTIONAL BEZEL WITH INDEX MARKERS
The bezel of your watch is marked with 12index markers:
they are used as points of reference to mark a start time
or a limit time you wish to remember. On models with
no chronograph functions, they also provide a «minute
chrono» function enabling you to measure the elapsed
time in minutes.
PREPARATION FOR USE
WINDING TIMESETTING
1. Wind the watch through approximately 40 clockwise turns of the
crown.
2. Pull the crown out to position 2. Then adjust the hour and minute.
3. Push the crown back into position 1.
To Next Page
Loading...
