USING THE CHRONOGRAPH
I.
MEASURING A SINGLE SHORT TIME
1. Press pushpiece A to start the chronograph. Hand 2 shows the
measurement in seconds.
2. Stop the measurement by pressing pushpiece A once more. The
measurement is made in minutes (totalizer1), seconds and
1
/
4
of a second (hand2).
3. Reset the chronograph to zero by pressing pushpieceB.
BREITLING | NOIR ROUGE | ME TOP TIME | CA-01-20-140345 | Format 1 05x85 mm
BREITLING | NOIR ROUGE | ME TOP TIME | CA-01-20-140345 | Format 1 05x85 mm
BREITLING | NOIR ROUGE | ME TOP TIME | CA-01-20-140345 | Format 1 05x85 mm
PREPARATION FOR USE
WINDING TIMESETTING
1. Wind the watch through approximately 40 clockwise turns of the
crown.
2. Pull the crown out to position 2. Then adjust the hour and minute.
3. Push the crown back into position 1.
151514