Page 1
Manual Brel 24mm electronic DC bi-directional radio middle motor
Type BJE24D
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty can’t be claimed.
warning:
Children cannot recognize the dangers of electrical equipment and may therefore not work with it.
It is important to follow this instruction for your own safety.
1. Do not operate the motor in humid surroundings.
2. The motor must be installed correctly.
3. Keep the antenna in a good condition and do not shorten.
The antenna should not come into contact with other metal
parts otherwise it will reduce the effect.
4. The motor must be protected from direct moisture influences.
5. BREL-Motors declares that this motor has been manufactured according to the guidelines of the CE standard 1999/5/EC
_______________________________________________________________________________
Functions remote control Changing batteries
DD-2702H
Works with all BREL transmitters:
Scan the QR code here for
The manual to download and
View the instruction videos
Visit our website www.BREL-HOME.com for
More manuals and information
____________________________________________________________________________________
Technical data of the motor Type BJE24D
Voltage motor: DC 12V
Radiofrequency: 433.9 Mhz
Power: 14 Watt
Torque: 0.8 Nm
Speed: 34 rpm
Ampèrage : 1.18 A
Moisture and dust protection: IP20
Temperature range:
o - Normaal use: -10℃ tot +55℃
To Next Page
Need help?
General
