Page 1
BREL motors is part of:
Manual Brel emitter with clock
Type DC-458 and DC-920
Read the manual before you begin the installation. If these instructions are not followed,
this may lead to defects and injury in which warranty can’t be claimed.
____________________________________________________
Technical specifications Type DC-458 and DC-920 Note:
Battery type: 3V CR2430 The time difference between
Frequency: 433,92MHz automatically controlling up
Emission power: 10 MW and down, must be atleast 32
Emission distance: 200 meter open field minutes, otherwise there will
2 walls 35 meter. be ERROR on the display.
____________________________________________________
Button specifications
Operates with these BREL motors and transmitters:
Motors: MR, MEV, MCE, MDE, MLE, MJE, MTE, MEQ, MPE.
Transmitters: DC-50, DC-90, DC-92, DC-94, DC-101, DC-109, DC-114, DC-227, DC-252,
DC-253, DC-292, DC-305, DC-306, DC-313, DC-2700, DC-2702.
____________________________________________________
Teaching multiple transmitters
2xP2 1xP2
Press 2x the P2 Press 1x the P2 The programming of the
Button. (a) button. (b) new transmitter is ready.
To delete one channel , you must repeat the above operation.
To Next Page
Need help?
General
