Page 4
Technical data of the motor
working voltage AC 230V
Radio frequency 433.92MHz
Working current ＜20mA
Working temperature -10
℃~65℃
Radio range indoor＞30 meters
Safety code 50 million times without repeat, high security
DD116
1 Stable performance, wireless remote control.
2 The sensor can be fixed to the wall with two screws.
3 There are 7 different wind grades and 4 different light intens ity grades.
4 When the wind intensity exceeds the first set grade for the first time, the sensor will send signals
automatically to the motor to close the awning within 3~6S; when the wind intensity exceeds
the set grade continuously, the sensor will send signals to the motor every 3 minute one time.
5 When the light intensity exceeds the set grade continuously more than 5 minutes, the sensor
will send signals to close the awning; when the light intensity hasn't reached the set grade
continuously more than 5 minutes, the sensor will send signals to open the awning; when the
light intensity exceeds the set grade continuously, the sensor will send signals every 5 minutes
one time for 19 times totally; when the light intensity hasn't reached the set grade continuously,
the sensor will send signals every 15 minutes one time for 10 times totally.
WARNING:
1 Make sure the wind-sun sensor should be paired to the receiver successfully.
2 Make sure press UP button on the paired emitter, the awning will be closed.
NOTE
To Next Page
Loading...