EasyManua.ls Logo

Bremshey BE5 - Heart Rate Measurement; Hand Pulse Sensor Notes; Chest Belt Measurement Accuracy; Chest Belt Safety and Cautions

Bremshey BE5
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NOTE
Do not use the hand pulse sensors in combination with a heart rate
chest belt.
If you set a heart rate limit for your workout, an alarm will sound
when it is exceeded.
Heart rate measurement (heart rate chest belt)
The most accurate heart rate measurement is achieved with a heart rate chest belt.
The heart rate is measured by a heart rate receiver in combination with a heart rate
transmitter belt. Accurate heart measurement requires that the electrodes on the
transmitter belt are slight moist and constantly touching the skin. If the electrodes are
too dry or too moist, the heart rate measurement will become less accurate.
WARNING
If you have a pacemaker, consult a physician before using a heart
rate chest belt.
CAUTION
If there are several heart rate measurement devices next to each
other, make sure that the distance between them is at least 1.5
metres.
If there is only one heart rate receiver and several heart rate
transmitters, make sure that only one person with a transmitter is
within transmission range.
EN
BE5 15