EasyManua.ls Logo

brennenstuhl JARO User Manual

brennenstuhl JARO
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
7
D Operating Instructions
Mobile LED Light / Tripod LED Light
JARO
Note: Before use of the oodlight, please carefully read the operating instructions and store them
at a proper location!
TECHNICAL DATA
Protection class: I
IP class: IP 65
Nominal voltage 230 V versions: 220-240 V~ 50/60 Hz
Nominal voltage 110 V versions: 100-130 V~ 50/60 Hz
Connection line: H07RN-F 3G1,0
Power factor: see table (page 2)
These LED oodlights are suitable for indoor and outdoor lighting purposes.
OPERATION
Place the oodlight on a dry and level surface. The inclination of the oodlight is adjustable. To do
so, loosen the lateral quick release, turn the lamp head into the desired position and lock the quick
release again.
Quick-release lever
Framework
Carry handle
OPERATION
TRIPOD, LED FLOODLIGHT
The oodlight with type designation T is supplied with tripod.
In this connection, you must imperatively ensure sucient stability of the tripod and rm
assembly of the oodlight.
18P083 Mobiler_Stativ LED Strahler Jaro 498291 181120.indd 7 20.11.2018 13:52:41
Question and Answer IconNeed help?

Do you have a question about the brennenstuhl JARO and is the answer not in the manual?

brennenstuhl JARO Specifications

General IconGeneral
Total power10 W
Luminous flux900 lm
Bulb technologyLED
Number of bulbs- bulb(s)
Color temperature6500 K
Product colorSilver
Housing materialMetal, Plastic
Suitable for outdoor useYes
International Protection (IP) codeIP44
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth138 mm
Width69 mm
Height173.5 mm
Weight460 g

Summary

Technical Data

Tripod Operation

LED Floodlight Assembly

Safety Information

Power Supply Check

Always check the floodlight and power supply line for damage before use. Never use if damaged.

Electrical Hazard Warning

Caution! Risk of fatal injury from electrical current with damaged floodlight or power supply line.

Maintenance and Cleaning

Light Source Replacement

Light source is not replaceable; entire lamp needs replacement at end of service life.

Cleaning Instructions

Use dry or slightly moistened cloth; avoid solvents and caustic agents.

Disposal Guidelines

Declaration of Conformity

Manufacturer Addresses

Related product manuals