Premium-Web-Line V3
PWL ... V3
Quick Manual
Intended use
The multiple socket strip is used to control, measure and monitor
the 230V power supply of electric devices with a web browser
via a network (Ethernet).
The multiple socket strip is intended to be used only in dry rooms.
Any other use is not permitted. If you have any questions regarding
spare parts or repairs, please contact the manufacturer.
Connection
• Connect the power plug to a socket.
¬ The Power
display is illuminated.
• Connect the network connection
of the multiple socket strip
to a free port of your router
.
• Connect the desired devices to the respective socket (
, )
of the multiple socket strip.
Cable with power plug
Surge protection
ON/OFF 1 sockets (Master)
ON/OFF 2 sockets (Slave)
Network connection
(Ethernet)
ON/OFF 1 button/display
(Master)
ON/OFF 2 button/display
(Slave)
Power display
Router
(not included in the
scope of delivery)
Determination/configuration of the IP address
In order to call the web interface of the multiple socket strip you need its
IP address.
•
With DHCP server: (integrated in most routers)
The multiple socket strip is automatically assigned an IP address
when it is turned on. Determine it from the settings of the
DHCP server (router) and set it to assign the same IP address
at every start-up.
•
No DHCP server/static IP address:
In order to read out and/or configure the IP address of the multiple
socket strip, please use our computer software „BS-Finder“.
Go to www.brennenstuhl.com to download
it for free. You will also find detailed instructions there.
Configuration/operation with web interface
LAN / WLAN application:
• Make sure that your computer/tablet/smartphone is connected
to the same network as the multiple socket strip.
• Enter the determined IP address of the multiple socket strip
into the address bar of the web browser as follows:
http://“IP address“/ (e.g. http://192.168.0.100/)
• A login window is displayed. Log in as follows (factory settings).
User name: admin Password: admin
• You are now in the status window of the web interface
of the multiple socket strip.
• Download a detailed manual with all possible settings
for free at www.brennenstuhl.com.
• Please change the user name and password to protect
the multiple socket strip from unauthorised access.
INTERNET / WEB application:
The following is required to access the multiple socket strip
from the Internet:
• Internet access with static IP address or dynamic DNS server
(e.g. www.noip.com)
• Active port forwarding in the router to allow connections between
the Internet and the multiple socket strip in the network.
Download a detailed manual with configuration examples for free
at www.brennenstuhl.com.
0498651/819
Structural overview
Depending on the product version, the technical features differ:
Scope of delivery
1 x Premium-Web-Line
multiple socket strip
1 x Ethernet cable, 1 metre
1 x Brief instructions
Design Patent
Power
On/Off 2
(Slave)
On/Off 1
(Master)
LAN
(Slave)
On/Off 2
(Master)
On/Off 1
LAN / W-LAN INTERNET / WEB
Design Patent
Power
On/Off 2
(Slave)
On/Off 1
(Master)
LAN
(Slave)
On/Off 2
(Master)
On/Off 1
Manual operation at the device
• Briefly press the ON/OFF buttons ( , ) to manually
turn the corresponding sockets (
, ) on or off.
• The respective switching condition is indicated
by the two displays (
, ).
Loading factory settings
Press both buttons ( + ) at the same time for approx. 5 seconds
to reset the multiple socket strip to the factory settings. This may be
helpful, e.g. if you lost the access data.
Caution: All settings are lost in the process!
Surge protection (optional)
The surge protection system prevents the devices connected to the power
strip from being damaged by voltage spikes in the mains network which
can result, e.g. from direct lightning strikes or switching on inductive
loads like motors, ovens, lamps, etc. In order to function correctly, the
device must be connected to an outlet with a pro perly installed protective
ground.
In case of a direct lightning strike, due to the extremely high energy
generated, complete protection of the connected devices cannot be
guaranteed. You can get the highest level of surge protection with a
multilevel concept consisting of coarse and medium protection
(installation technology) together with our fine protection
per EN 61643-11 type 3.
When the socket outlet is switched on, the green indicator lamp lights
up, showing that the surge voltage protection circuit is active.If the green
lamp doe not light up, the sockets are dead. The protective effect is not
existing anymore and the multiple socket has to be sent to the manufactu-
rer for repair as the protection device has been destroyed by very
high overload.
Insurance protection for connected devices (optional)
Brennenstuhl guarantees the surge characteristics up to the technical
specifications indicated on the type label of the relevant product. If the
product is used correctly, Brennenstuhl assumes any repair or exchange
of all devices directly connected to the surge protection product and that
are proven to have been damaged by surge, if the following applies:
damage must arise from the non- observance of the described protection
function according to the technical specifications. For this purpose, there
is an insurance protection for damage to persons and property within our
product liability amounting up to 5 million euros.
Interference filter (optional)
The Interference filter protects sensitive alectronics, e. g. in computers,
television sets and stereo systems, from highfrequency interference
voltages. In this way, interference with pictures and sound is effectively
suppressed.
Technical data
Designation:
Supply voltage:
Total power:
Power consumption:
Network connection:
PWL ... V3
230 V~
< 0.9 W (sleep mode, relay off)
Ethernet 10/100 Mbit/s
Safety instructions
Observe the following safety instructions.
Failure to comply may result in damage to persons and property.
The guarantee becomes void if damage is caused by failure to comply
with this manual, in particular with the safety instructions. Furthermore,
the manufacturer shall not be liable for consequential damage.
Danger!
Danger to life due to electric shock
Do not touch damaged, open or live parts!There is a danger of electrical
shock. Before using the multiple socket strip, check it for damage.
If the cable insulation or the housing is damaged, the multiple socket
strip may no longer be used.
Danger!
Devices that start without supervision
Electric devices and consumers that are started without
supervision may represent a source of danger. For this reason, only use
the switching function for devices that were expressly released by their
manufacturers for this purpose and do not cause any danger on start-up. In
the case of doubt, please contact the respective manufacturer before use.
• To avoid danger, a damaged connection cable of the multiple socket
strip may only be replaced by the manufacturer, its service
representative or a similar expert.
• Do not manipulate or modify the multiple socket strip.
• Only have it repaired by experts.
• Keep the multiple socket strip out of the reach of children.
• Only operate one device per socket.
• Do not cover the multiple socket strip while it is in operation.
• Place the device close to a mains socket and make sure it is accessible
in order to be able to disconnect the device from the mains at any time.
Maintenance and cleaning
The multiple socket strip is maintenance-free.
Disposal
Do not dispose of electronic devices together
with household waste!
According to the European directive 2012/19/EU on waste
electrical and electronic equipment, used electric devices have to
be collected separately and recycled in an environmentally-friendly
manner. In order to find out ways to dispose of the disused device,
contact your local or municipal authorities.
Declaration of conformity
The declaration of conformity is kept on file by the manufacturer.
Manufacturer:
Hugo Brennenstuhl GmbH & Co. KG
Seestr. 1-3 · 72074 Tübingen · Deutschland
www.brennenstuhl.com
Danger!
Danger to life due to electric shock
Do not touch damaged, open and live parts of the multiple socket strip
and the cable! Otherwise, there is danger to life due to electric shock!
• Never clean the multiple socket strip while it is energized.
• Prior to cleaning, always disconnect the power plug
from the socket.
• Never submerge the multiple socket strip in water.
Clean the multiple socket strip with a dry cloth.
max. 16 A / 3500 W µ
To Next Page
Need help?
General
