To Next PageTo Next Page
Need help?Do you have a question about the brennenstuhl TRX 3500 and is the answer not in the manual?
General| Brand | brennenstuhl |
|---|---|
| Model | TRX 3500 |
| Category | Two-Way Radio |
| Language | English |
Identifies and labels the physical controls and features of the walkie-talkie.
Explains the meaning of various symbols and indicators shown on the LCD screen.
Provides instructions for removing and attaching the belt clip to the walkie-talkie.
Details the process for inserting the required 3 AAA alkaline batteries into the device.
Explains how the battery level is displayed and when batteries should be replaced.
Instructions for powering the PMR walkie-talkie on and off.
Explains the use of the CALL button to send a ring tone to other users.
Details how to adjust the speaker volume using the UP and DOWN buttons.
Describes how the device operates in receive mode and shows the 'RX' symbol.
Explains how to transmit voice signals using the PTT button and microphone.
Explains the Roger beep feature, which signals the end of a transmission.
Details the steps to change the operating channel on the walkie-talkie.
Describes how to automatically scan channels to find other active walkie-talkies.
Explains the auto squelch feature for filtering noise and how to temporarily deactivate it.
Explains how to lock and unlock the keys to prevent accidental changes.
Describes the LCD screen backlighting, which activates briefly when a button is pressed.
Details the power-saver mode that extends battery life after inactivity.
