Need help?Do you have a question about the brent Corner Auger 1080 and is the answer not in the manual?
Provides introductory safety messages and operational guidelines.
Information about general hazards related to operation and potential risks.
Details on safety decals, their importance, and replacement.
Emphasizes understanding manuals and strictly following safety rules.
Critical safety precautions to follow during operation of the equipment.
Guidelines and safety measures for transporting the grain cart.
Safety precautions to observe during maintenance activities.
Specific safety instructions and warnings for the driveline.
Recommendations for wearing appropriate personal protective gear.
Steps to prepare the tractor before operating the grain cart.
Essential checks and preparations for the grain cart before use.
Procedures for safely connecting the grain cart to the tractor.
Instructions for connecting the hydraulic hoses and lines.
Steps for connecting the cart's electrical system to the tractor.
Safety guidelines and procedures for towing the grain cart.
Safety warnings and operational steps for the auger.
Basic operation and procedures for the optional electronic scale.
Guidelines for operating the cart with the track system.
General lubrication procedures for the grain cart.
Maintenance procedures for the track system components.
How to check and adjust the track tension correctly.
Steps and guidelines for achieving proper track alignment.
Correct torque values for wheel nuts.
Maintenance procedures for the auger system.
Maintenance and lubrication for PTO shafts and clutches.
A flowchart to diagnose and resolve common scale issues.
Procedures for calibrating and setting up the scale system.
Procedures for the initial setup of the grain cart.
Steps for installing the optional scale kit components.
Procedures for installing the optional hydraulic drive.
Parts list and diagram for the final assembly.
Parts list and diagram for the hitch assembly.
Parts list and diagram for the auger assembly.
Parts list and diagram for the hydraulic system.
Parts for the optional track assembly and axle.
General| Model | 1080 |
|---|---|
| Category | Outdoor Cart |
| Power Source | Gasoline |
| Wheel Type | Pneumatic |
| Auger Diameter | 8 inches |
| Auger Length | 36 inches |
| Hole Diameter | 8 inches |
To Next Page