Brenthaven EDGE 360 User Manual

Insert iPad into case. Make
sure iPad buttons and
ports align with cutouts.
Place screen cover over iPad,
aligning the home button.
IMPORTANT:
Ensure TOP side of the
overlay is oriented up.
Starting at any corner, press
screen cover into case. Then
apply pressure along the
covers perimeter to secure into
case on all sides.
Pull tab until the stand locks into the wanted
viewing/typing position.
Typing position
STAND INSTRUCTIONS:
Viewing position
Note: there are 2 angles
Peel o protective film from
both sides of screen cover.
ASSEMBLY - EDGE 360
FOR iPAD 6TH GEN 9.7”
1 2 3 4

Brenthaven EDGE 360 Specifications

General

Brand	Brenthaven
Model	EDGE 360
Category	Tablet Accessories
Language	English

Summary

iPad Case Assembly Instructions

Insert iPad into Case

Insert the iPad into the case, ensuring buttons and ports align with cutouts.

Prepare Screen Cover

Peel off the protective film from both sides of the screen cover.

Position and Align Screen Cover

Place the screen cover over the iPad, aligning the home button and orientation.

Secure Screen Cover

Press the screen cover into the case perimeter to secure it on all sides.

Stand Instructions

Adjust Stand Position

Pull the stand tab until it locks into the desired viewing or typing position.

Viewing and Typing Angles

The stand supports viewing at two angles and a dedicated typing position.