To Next PageTo Next Page
Need help?Do you have a question about the Bresser 35x and is the answer not in the manual?
Assemble and extend the tripod legs, ensuring stability on a flat surface.
Mount the telescope tube onto the mounting head, securing it with the clamping screw.
Insert the star diagonal prism and eyepiece, securing them with screws.
Attach and align the viewfinder with the main telescope for accurate aiming.
Align the telescope mount using latitude setting and pointing towards Polaris.
Solutions for common issues like no picture, blurred picture, or bad focus.
Assemble and extend the tripod legs, ensuring stability on a flat surface.
Mount the telescope tube onto the mounting head, securing it with the clamping screw.
Insert the star diagonal prism and eyepiece, securing them with screws.
Attach and align the viewfinder with the main telescope for accurate aiming.
Align the telescope mount using latitude setting and pointing towards Polaris.
Solutions for common issues like no picture, blurred picture, or bad focus.
General