EasyManua.ls Logo

Bresser Analyth STR - Observation; Focusing and dioptre compensation; Eye distance; Replacing the Eyepieces

Bresser Analyth STR
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 9 -
3. Observation
Placethedesiredobjectinthemiddleofthestage(10)andsecureitwiththeclamps(11)if
necessary.Theobjectivesmagnication(1x,2xor4x)canbeadjustedbyturningtheobjective
holder(12).Itisrecommendedtostartobservationsalwayswiththelowestmagnication
(1x).Nowlookthroughtheeyepieces(1)atthebinocularhead(3).Adjustthesharpnesswith
thefocuser(4).
4. Focusing and dioptre compensation
Setthedioptrescale(2)totothemiddleposition(shinyring)andobserveanobject.Now
closeyourlefteyeandadjustthefocuswiththefocuser(4)foryourrighteye.Then,closeyour
righteyeandadjustthefocusforyourlefteyewiththedioptrescale.Now,themicroscopeis
adjustedforyoureyes.Notethesettingofthedioptrescaleyouneedtouseinfuture.
5. Eye distance
TheAnalythSTRisequippedwithanadjustablebinocularhead.Tosetyoureyedistance,
movetheeyepiecesagainsteachotheruntilyoufoundtheidealposition.
6. Replacing the Eyepieces (optional)
Toreplacetheeyepiecesyouneedtoloosentheclampscrewontheundersideoftheeyepiece
holder.Youcantheneasilyremoveandreplacetheeyepieces.
Theclampscrewsserveonlyasprotectionsothattheeyepieceswillnotfallout.
Note:
TheLEDilluminationhasalifespanofapprox.20,000hours.Inthecaseofatechnicalerror
pleasecontacttheservicecenter.
7. Adjusting the friction of the focusing drive
ItcanhappenthattheMicroscopeheadisnolongerheldbythefocusingdriveandshuts
downbecauseofhisnetweight.
Byturningthetwofocusingwheelsinoppositedirections,thefrictioncanbeadjustedmore
rmlyorloosely.
8. Cleaning and maintenance
Yourmicroscopeisahigh-qualityopticalinstrument.Pleasetakecarethatneitherdustnor
ngerprintstakeplaceontheopticalsurfaces.Ifnecessary,cleanthemicroscopebodywitha
slightlymoistenedsoftcloth.Useaseparatecleanclothwithsomedropsofalcoholtoclean
theopticalsurfaces.Afterusing,themicroscopeshouldbeprotectedwithitsdustcover.
Note:
Pleaseconsiderthatasufcienttreatedmicroscopekeepsitsvalueandopticalqualityfor
manyyears.
DE
GB
FR
ES

Related product manuals