Bresser MyTime Echo - Establishing the Power Supply; Mains Operation; Battery Operation (Optional)

10 / 56
1 Current time (hours) 2 Current time (minutes)
3 Temperature value 4 Temperature unit (°C or °F
selectable)
5 Night mode 6 Alarm time (hours)
7 Alarm time (minutes)
8 Establishing the power supply
(mains operation)
1. Put the DC connector into the connection socket of the
device.
2. Put the mains plug into the power outlet.
3. The device is energized directly.
9 Establishing the power supply
(Battery operation, optional)
1. Remove the battery compartment cover.
2. Insert the batteries into the battery compartment. En-
sure that the battery polarity (+/-) is correct.
3. Replace the battery compartment cover.