GB/IE
27
2. GETTING STARTED
2a) BEFORE YOU BEGIN
For best operation,
1. Insert batteries for remote units before doing so for the main
unit.
2. Position the remote unit and main unit within effective trans-
mission range, which, in usual circumstances, is 20 to 30
meters.
Note that the effective range is vastly affected by the building
materials and where the main and remote unit is positioned.
Try various set-ups for best result.
Though the remote unit is weather proof, they should be placed
away from direct sunlight, rain or snow.
2b) BATTERY INSTALLATION: REMOTE UNIT
1. Remove the screws on the battery compartment
2. Install 2 batteries (UM-4 or „AAA“ size 1.5V) strictly
according to the polarities shown.
3. Replace the battery compartment door and secure its screws.
2c) BATTERY INSTALLATION: MAIN UNIT
1. Open the battery compartment door.
2. Install 2 batteries (UM-3 or „AA“ size 1.5V) strictly
according to the polarities shown.
3. Replace the battery compartment door.
2d) LOW BATTERY WARNING: MAIN UNIT
When it is time to replace batteries, the respective low-battery
indicator [
] next to the time with seconds will be shown on the
main unit‘s display.
To Next Page
Loading...
