Configure the Cart to Join a Wi-Fi Network
To configure the PowerSync Cart to join a Wi-Fi network, you’ll use your
iOS device’s Bluetooth connection to share it’s Wi-Fi network information
with the cart.
1. Make sure your iOS device is connected to the Wi-Fi network you want
to share with your cart
2. Turn the cart power switch to OFF, then back to ON
After turning on, if you haven’t already configured your cart, your cart will
be discoverable via Bluetooth for one minute.
3. On your iOS device, open the Settings app, and navigate to Bluetooth
4. Choose to pair with “PowerSync+”
5. When prompted to “Share Wi-Fi Settings”, tap the “Allow” button
6. Your PowerSync cart will join your Wi-Fi Network. Use the PowerSync+
app to link your cart to your free PowerSync+ account and complete
the setup.
To Next Page
Loading...