Why is my Breville Hot Cup Water Dispenser producing excess steam but not dispensing water?
If your Breville Water Dispenser is producing excess steam but not dispensing boiling water, it could be due to a low water level or excessive scale buildup. * **Low water level:** Ensure the water level is between the MIN and MAX markings before restarting the boil cycle. * **Excessive scale:** Descale your Hot Cup.
How to fix a Breville Hot Cup Water Dispenser that doesn't dispense a full cup?
If your Breville Water Dispenser is not dispensing a full cup of water, it is likely due to excessive scale build-up. Descale your Hot Cup to resolve this issue.
Why won't the on/off switch stay on for my Breville Hot Cup?
If the on/off switch on your Breville Water Dispenser won't stay in the 'on' position, it's likely because the appliance hasn't reset after the boiling cycle. Allow it to cool slightly before trying again.
What to do if my Breville Hot Cup Water Dispenser keeps dispensing water after I switch it off?
If the on/off switch on your Breville Water Dispenser is manually switched off during the boil cycle but hot water is still dispensed, allow it to finish the boil cycle and dispense any remaining water into the drip tray. Let the water in the drip tray cool before emptying it, as the appliance is designed to boil a set volume of water.
General| Brand | Breville |
|---|---|
| Model | Hot Cup |
| Category | Water Dispenser |
| Language | English |
Guidelines for product use by children aged 8+ and supervised persons.
Warnings against improper power bases, overfilling, and damaged cords.
Guidelines on handling, placement, and environment to prevent burns and damage.
Specific warnings during operation, including steam, filling, and dispensing.
Step-by-step guide on filling, operating controls, and dispensing water.
Steps for descaling the appliance with a commercial descaling solution.
Instructions for descaling using common household items like vinegar or citric acid.
To Next Page
