Why won't the Breville HotCup VKT111 Dispenser start button press?
The start button may not work because the appliance hasn't reset after boiling. Ensure the reset button at the rear is pushed in. If it's too hot, wait a bit. Also, check the water level; if it's below the MIN level, add cold water to help it cool faster. Make sure the dispenser is plugged in and switched on. Finally, check the fuse in the plug.
What to do if Breville Dispenser produces excess steam but does not dispense boiling water?
If your Breville Dispenser is steaming but not dispensing water, it could be due to a low water level or excessive scale buildup. Ensure the water level is between the MIN and MAX markings and restart the boil cycle. If scaling is the issue, descale the appliance.
Why does my Breville HotCup VKT111 Dispenser not dispense a full cup of water?
If your Breville Dispenser isn't dispensing a full cup, it's likely due to excessive scale buildup inside the appliance. Descaling the appliance should resolve this issue.
Why does my Breville HotCup VKT111 Dispenser make a clunk sound after dispensing water?
The 'clunk' sound you hear after dispensing water from your Breville Dispenser is the internal valve operating after the boil cycle finishes. This is normal operation.
Why does water drip from the Breville Dispenser nozzle after use?
A little dripping from the Breville Dispenser nozzle after use is normal. It's just residual water left inside after the boil cycle.
Why is steam coming from behind the Breville Dispenser nozzle?
Steam coming from behind the dispensing nozzle of your Breville Dispenser is normal. The steam is being vented in a controlled manner through designed vents.
General| Power | 3000 W |
|---|---|
| Capacity | 1.7L |
| Material | Plastic |
| Water Level Indicator | Yes |
| Auto Shut-Off | Yes |
| 360° Rotational Base | Yes |
| Voltage | 220-240 V |
| Cord Length | 0.8 m |
| Weight | 1.2 kg |
Essential safety guidelines covering appliance use, handling, and user responsibilities.
Detailed listing and identification of all functional parts of the water dispenser.
Initial setup steps, including unpacking, cleaning, and initial operation for new users.
Step-by-step guide on how to operate the appliance for dispensing hot water.
Instructions for routine cleaning of the appliance's exterior surfaces.
Procedures for removing mineral buildup to maintain performance, using commercial or home solutions.
A guide to diagnose and resolve common operational problems encountered with the appliance.
Information and warnings regarding safe electrical plug fitting, wiring, and fuse replacement.
Initial steps to take if the appliance fails to operate correctly before seeking further assistance.
Procedures for returning the product for repair or replacement, including necessary documentation.
Details the appliance warranty period, coverage, exclusions, and buyer's rights.
Guidance on environmentally responsible disposal of the appliance and related WEEE directives.
To Next Page
