that need to be configured for each individual.
Enter the following:
Under General Configuration:
a. Node Callsign: Your callsign
b. DMR/CCS7 ID: Your DMR ID
c. Radio Frequency: If using a different
frequency, set to the simplex frequency you
are using
Under Location and Hotspot Info Settings:
d. Town and Country are self-explanatory.
Latitude: A positive value indicates North,
and a negative value indicates South.
Longitude: A positive value indicates East,
and a negative value indicates West.
e. URL: By default, this is set to your QRZ
page. If desired, you can change this to an
alternate webpage.
Under MMDVMHost Configuration:
f. DMR Mode is turned on by default. If you
are not using your hotspot for DMR, turn
this off.
g. Turn on the other digital modes that you will
be using. We do not offer direct support on
To Next Page
Loading...