Need help?Do you have a question about the Bridgeport VMC 560/22 and is the answer not in the manual?
General| X-Axis Travel | 22.0 in (560 mm) |
|---|---|
| Y-Axis Travel | 16.0 in (406 mm) |
| Z-Axis Travel | 20.0 in (508 mm) |
| Spindle Motor Power | 15 hp (11.2 kW) |
| Control | Heidenhain TNC 370 |
| Machine Weight | 7, 500 lbs (3, 402 kg) |
Covers safe installation, guarding, software, personnel, and practices.
Lists basic precautions, ANSI, and OSHA standards for safe operation.
Details personal protective equipment, operational safety, and work area rules.
Focuses on preventing cutter breakage, material hazards, and fire prevention.
Covers introduction, uncrating, shortages, lifting, and location preparation.
Information on electrical cabinets, supply voltages, and power requirements.
Details machine cleaning, lubrication, coolant system setup, and recommended lubricants.
Outlines general commissioning, inspection, mains supply, pneumatics, and export procedures.
Covers XYZ servo drive, general specs, control system, and performance charts.
Details input supply voltages, circuit breakers, and power distribution.
Comprehensive electrical schematics detailing component connections and layouts.
Itemized lists of electrical and mechanical components for various assemblies.
Visual representations of component placement and assembly for different machine parts.
Covers warranty, daily, weekly, yearly, and multi-shift maintenance routines.
Initial checks and diagnostic aids for identifying faults.
Lists and explains common error messages and their causes.
Details fault codes, possible causes, and procedures for fault acknowledgement.
To Next Page