2022 Owner’s Manual Eagle 8 BRIG ltd
34
Do not discharge waste water overboard if prohibited.
We recommend rinsing the wastewater tank with clean water with the addition of cleaning agents
after each emptying of the tank.
SERVICING.
1.To inspect
and service the wastewater system open inspection hatches (5), (9), (10), remove locker under the seat.
2.Flush the toilet with clean water with cleaning agent. To do this, pour cleaning agent into the toilet and press button (14).
Turn off the battery isolation switches (Fig.2b, pos.28).
3.Inspect hoses, macerator, faucets, toilet. Inspect the wastewater tank. There should be no damage, cracks, scuffs.
There should be no water leakage from the wastewater system.
4.Open/close the faucets (11), (12) several times to check their functionality.
5.Inspect the inlet ventilation (6). There should be no damage, dents, cracks. Clean it from dirt and algae if necessary.
6.Inspect the scoop strainer (13) on the lower boat hull. There should be no damage, dents, cracks on the scoop strainer
and the boat hull around. Clean the scoop strainer from dirt, algae if necessary.
7.The active carbon filter (7) prevents unpleasant odors from escaping from the wastewater tank.
The filter works as an
adsorbent and has a limited life. Replace it if necessary. To do this, contact your BRIG dealer.
Water on freezing can damage the wastewater system.
Water from the tank and hoses must be removed if there is a risk of freezing
To Next Page
Loading...
