BRIG Eagle 8 - ELECTRICAL SYSTEM; SWITCH PANEL

2022 Owner’s Manual Eagle 8 BRIG ltd
44
ELECTRICAL SYSTEM.
This section reviewed the individual electrical components and their locations and functions in the electrical system. For
more complex questions beyond the scope of this manual, please contact your nearest BRIG dealer.
Do not modify the electrical system yourself. Any modifications, repairs and routine maintenance of the electrical
system and all of its components may only be performed by authorized representatives.
SWITCH PANEL.
The switch panel (1) Fig.17 and windlass control switch (2) are located on the dashboard of the steering console. The
USB and 12V sockets (3) are located inside the glove box on the steering console.
1 - panel with switches:
a- horn
b- navigation lights (red and green)
c- anchor light (white all-round)
d- bilge pump 1 (auto mode)
e- bilge pump 1 (manual mode)
f- shower pump (fresh water)
g- auxiliary switch
h- auxiliary switch
2 - switch for control of anchor windlass
3 - USB and 12V sockets
Fig.17
The switch panel:
a- horn. Press the switch to beep. Make sure the horn is tested before each outing as it can be valuable in navigation
situations and can be used for bridge communications.
b- navigation lights (red and green). Press the switch to turn on/off the navigation lights (red and green). Navigation
lights are mounted on the bow step plate.