2022 Owner’s Manual Eagle 8 BRIG ltd
56
Use the front towing U-bolts and rear lifting U-bolts to fix the boat with straps to the trailer.
After storing the boat on keel blocks or after transporting it on a trailer, carefully inspect the boat's hull. There should be no
damage to the boat's hull.
Never use a buoyancy tube to support a boat on a trailer or keel-blocks.
Incorrect installation of the boat on a trailer or keel-blocks can damage the boat's hull.
You can always get more information from the BRIG dealer regarding the installation of the boat on a trailer
or keel-blocks for storage.
To mount the boat on a trailer, always use the entire surface “Load area”
or the recommended “Point of supports” on it.
Securely fix the boat with straps to the trailer using the front and rear U-bolts.
When towing a boat on a trailer, periodically check that it is securely attached to the trailer.
CONSOLE AND STERN SEAT COVER.
To protect your boat from ultraviolet radiation, bad weather, dust, we recommend using a cover kit. The cover kit consists
of a console cover and a stern seat cover (Fig.23, Fig.24).
Console cover can be of two versions: for boat without a T-Top
(Fig.23) and for boat with a T-Top (Fig.24). Stern seat cover is the same for both versions.
There are some peculiarities in
the process of installing the console cover. Contact your BRIG dealer for advice.
To Next Page
Loading...
