To Next PageTo Next PageHow to fix reduced charge in Briggs & Stratton Battery Charger after non-use?
If the battery pack charge of your Briggs & Stratton Battery Charger is reduced after more than a month of non-use, it's likely because the battery pack has automatically performed self-maintenance to extend its life. To resolve this, fully recharge the battery pack before using it again.
What to do if my Briggs & Stratton BSB2AH82 Battery Charger shows defective mode?
If your Briggs & Stratton Battery Charger indicates a defective mode (LED flashes red), here's what you can do: 1. Remove and then reinsert the battery pack into the charger to ensure a secure connection. 2. Attempt to charge a different battery pack to see if the issue is with the original battery. 3. Unplug the charger from the power supply, wait for the red LED to turn off, and then plug it back in.
Why does my Briggs & Stratton BSB2AH82 Battery Charger show evaluative mode?
The Briggs & Stratton Battery Charger may show evaluative mode (red LED solid ON) because the battery pack is either too hot or too cold. Allow the battery pack to reach a normal temperature between 3°C-47°C (37°F-117°F). Charging will automatically begin when the battery pack is within this temperature range.
General| Brand | Briggs & Stratton |
|---|---|
| Model | BSB2AH82 |
| Category | Battery Charger |
| Language | English |
Details on 82V rechargeable Li-ion batteries (144Wh and 288Wh models).
Details on the 82V Lithium-ion Battery Charger (Model BSRC82).
Procedures for handling battery chemical exposure (inhalation, skin, eye, ingestion).
Rules for safe operation, maintenance, and storage of the battery and charger.
Details hazards and precautions for handling Lithium-ion batteries.
