Briggs & Stratton industrial plus 90000 series User Manual

Document: - page 1 (Black)
Screen angle and frequency: 45.0000, 150.0000
Model Series
Covered in
This Manual
90000
Industrial Plus
Operating & Maintenance
Instructions
Model Type Code
Month Day Year
Note: General Model Series numbers noted above are inclusive of the specific model
number found on your engine. To get replacement parts or technical assistance in
the future, write your engine Model, Type, Code and date of purchase here.
TABLE OF CONTENTS
Safety 3-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Engine Information 6. . . . . . . . . . . . . . . . . . . . . . . .
Oil 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting Information 9. . . . . . . . . . . . . . . . . . . . . . .
Starting and Stopping 10. . . . . . . . . . . . . . . . . . . . .
Maintenance 11-13. . . . . . . . . . . . . . . . . . . . . . . . .
Adjustments 14. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Parts and Service & Storage 15-16. . . . . . . . . . . .
Warranty Information 17. . . . . . . . . . . . . . . . . . . . .
WARNING
Briggs & Stratton does not approve or authorize the use of these engines
on 3-wheel All Terrain Vehicles (ATVs), motor bikes, aircraft products or
vehicles intended for use in competitive events. Use of these engines in
such applications could result in property damage, serious injury
(including paralysis), or even death.
Need assistance? Go to www.briggsandstratton.com
for detailed information regarding
Briggs & Stratton engines.
Or call,
1-800-233-3723, (U.S.A. and Canada)
to hear a menu of pre-recorded messages
offering engine maintenance information.
PRINTED IN U.S.A.  Copyright 2003 by Briggs & Stratton Corporation FORM NO. 274779-5/03

Briggs & Stratton industrial plus 90000 series Specifications

General

Brand	Briggs & Stratton
Model	industrial plus 90000 series
Category	Engine
Language	English

Summary

Safety Precautions

Fuel Handling and Starting Safety

General Safety and Engine Information

Engine Hazards and Pre-Operation Checks

Covers carbon monoxide, heat hazards, and safety checks before work.

Oil Management

Checking and Adding Engine Oil

Procedure for correctly checking and adding oil to the engine.

Fuel Management

Safe Fueling Procedure

Steps for safely filling the fuel tank, including precautions.

Starting and Stopping Engine

Manual Starting Procedure

Step-by-step guide for starting the engine using the rewind starter.

Engine Stopping Procedure

Instructions on how to properly stop the engine.

Maintenance Schedule and Tasks

Changing Engine Oil

Procedure for changing the engine oil, including proper disposal.

Detailed Maintenance Procedures

Air Cleaner and Pre-cleaner Service

Instructions for cleaning and maintaining the air cleaner system.

Engine Adjustments

Throttle Control Adjustment

Steps to adjust manual friction and remote throttle controls.

Carburetor Idle Speed Adjustment

Procedure for adjusting the engine's idle speed using the carburetor.

Parts and Service Support

Service and Storage

Engine Storage Preparation

Instructions for preparing the engine for long-term storage.

Engine Owner Warranty Policy

Limited Warranty Terms and Conditions

Details on warranty coverage, periods, and consumer/commercial use definitions.

Emission Control System Warranty

Emission Warranty Coverage and Owner Obligations

Emission Control Warranty (Canada & USA)

Emission Control System Warranty Statement