To Next PageTo Next Page
Need help?Do you have a question about the Briggs & Stratton Quantum 675 Series and is the answer not in the manual?
General| Displacement | 190 cc |
|---|---|
| Power Output | 6.75 ft-lbs Gross Torque |
| Fuel Type | Unleaded Gasoline |
| Oil Capacity | 20 oz (0.6 L) |
| Starting System | Recoil |
| Oil Type | SAE 30 |
| Engine Type | 4-stroke |
Describes engine power ratings and factors affecting them.
Explains hazard symbols and signal words used in the manual.
Covers warnings about chemicals, exhaust, and product usage restrictions.
Warns about flammability and explosion risks of fuel and vapors.
Warns about starter cord kickback and rotating part injuries.
Warns about hot engine parts, fire risks, and ignition from sparking.
Warns about the dangers of poisonous exhaust gas.
Instructions before adjustments, repairs, or spark testing.
Lists and describes various engine features and controls.
Details recommended oil viscosity and fuel types.
Step-by-step guide for oil level management.
Instructions for safely refueling the engine.
General guidance on engine startup procedures.
Guide to identify engine starting system type (ReadyStart, Primer, Choke).
Instructions for starting with the ReadyStart system.
Instructions for starting with the Primer system.
Instructions for starting with the Choke system.
How to safely shut down the engine using different methods.
Safety notes for maintenance, tipping, and component integrity.
Chart outlining service intervals and tasks.
Guide to inspect exhaust system components.
Instructions for replacing the spark plug.
Step-by-step guide for draining and refilling oil.
Detailed steps for adding oil to the engine.
Instructions for cleaning/replacing standard and high-capacity air filters.
Steps for replacing the fuel filter.
How to clean engine cooling fins and air intake.
Guidelines for storing equipment with fuel.
Advice on fuel stabilizer and storage.
Recommendations for oil during storage.
Lists model, displacement, bore, stroke, oil capacity.
Lists gap, torque, and other adjustment values.
Lists frequently replaced parts and their numbers.
Details warranty coverage periods for different engine types.
Lists conditions and actions that void the warranty.
Explains warranty rights and owner responsibilities for emissions control.
Explains emissions compliance periods based on engine usage.
