To Next PageTo Next PageWhy is the suction decreased on my Brigii Vacuum Cleaner?
Several factors can cause decreased suction in your Brigii Vacuum Cleaner. The air inlet or filter might be clogged, so clean them. The dust cup could be full, so empty it. Low power can also affect suction, so ensure the vacuum is charged. Additionally, a clogged filter reduces suction, so clean or replace the filter as instructed.
What to do if my Brigii Vacuum Cleaner is making abnormal noise?
If your Brigii Vacuum Cleaner is making abnormal noises, turn off the power immediately. Check for any foreign objects that may have been sucked into the vacuum. Also, ensure that the filters are installed correctly. Remove any obstructions and correctly install the filter.
The part where air and dust are drawn into the vacuum cleaner.
The container designed for collecting dust and debris.
Components responsible for filtering the air during operation.
The port used for charging the device via a USB Type-C cable.
The outlet from which air is expelled.
The casing that encloses the internal motor of the device.
Instruction to fully charge the device before its first use.
Procedure for turning the device on and off using the power button.
Explanation of the different states indicated by the LED lights.
Guidance and illustrations for using the suction function.
Instructions and diagrams for operating the air blowing feature.
How to use the device for deflating vacuum compression bags.
Method for easily disposing of collected dust without touching it.
Steps for washing and drying the dust cup and filtration components.
Advice on cleaning or replacing filters to maintain suction power.
Important warning against washing the main motor housing unit.
General| Brand | Brigii |
|---|---|
| Model | M1 |
| Category | Vacuum Cleaner |
| Language | English |
