Brik AP-32H User Manual (English)

To Next Page

Model: AP-32H

ADC+DAC Headphone Amplifier

Dear Friends,

Thank you for purchasing BRIK AP-32H, you can find content as below in the box.

 BRIK AP-32H x 1 unit

 USB Cable x 1pc

 BRIK 12V Adaptor x 1pc

 BRIK Disc x 1pc(included driver.)

 BRIK User Manual.

Key Feature

 DAC Support, playback resolution 32bit/384KHz

 ADC recording resolution 24bit/384KHz

 Support 2 Headphone Output with Volume Control

 USB B type input x 1

 Golden-Plated RCA Analog input x 1 (Recording)

 Metal housing and Aluminum front panel of Silver or Black.

 Miniature size of W 140 x H 48 x D 160 mm, 1,100g approx..

 AP-32H ships with Windows & Mac drivers that have to be installed on your

computer.

NOTE: Mac OS DO NOT NEED TO INSTALL DRIVER.

 An extension 12V power supply is included.

※ ATTENTION※

1. Turn off AP-32H:

Please turn off the power button of AP-32H, instead of plugging out USB cable from

computer directly for protecting your PC.

2. Note for choosing recording software:

Please make sure recording software can support 384Khz sample rate with seller.

Need help?

Do you have a question about the Brik AP-32H and is the answer not in the manual?

Brik AP-32H Specifications

General

Brand	Brik
Model	AP-32H
Category	Amplifier
Language	English

Summary

ATTENTION

Turn off AP-32H Safely

Turn off AP-32H using the power button, not by unplugging the USB cable, to protect your PC.

Recording Software Compatibility

Ensure your recording software supports a 384Khz sample rate.

Technical Specification BRIK AP-32H

Front Panel Environment

Volume Control for Headphone Output

Volume control for 2 headphone outputs.

Power Button and LED Indicator

On/Off Switch on the front; power LED glows when the unit is on.

3.5mm Headphone Jacks

Two 3.5mm headphone jacks located on the front panel of the AP-32H.

Rear Panel Environment

Rear Panel Connections Overview

Details on 12V power supply, USB, and RCA stereo input connectors on the rear panel.

Install driver of AP-32H

AP-32H Driver Installation on Windows PC

Instructions for installing the AP-32H driver on a Windows PC, including executing SETUP.EXE.

Uninstallation Guided Instruction

Uninstall AP-32H Driver

Steps to uninstall the AP-32H driver via the Control Panel.

Suggested software to execute Playback with AP-32H

Playback Software Setup: FooBar2000

Using FooBar2000 with WASAPI or ASIO for high sample rate playback.

Configuring Playback Output (WASAPI/ASIO)

Setting up WASAPI or ASIO output in FooBar2000 preferences for optimal playback.

Brik AP-32H User Manual