Need help?Do you have a question about the Brilliant Fires Limited SLAB 30 and is the answer not in the manual?
General| Model | SLAB 30 |
|---|---|
| Category | Indoor Fireplace |
| Manufacturer | Brilliant Fires Limited |
| Fuel Type | Electric |
| Weight | 15 kg |
| Color Options | Black, White |
| Remote Control | Yes |
| Flame Effect | LED |
Instructions for operating the fire using the manual control knob.
Instructions for operating the fire using the remote control handset.
Further instructions for remote control fire lighting, adjustment, standby, and turn off.
Guidance on replacing batteries and important safety notes for remote operation.
Procedures for cleaning the stainless steel box and Corian mantle/hearth.
Instructions for cleaning/replacing ceramics and general important safety notes.
Lists user-replaceable parts and outlines installation/servicing engineer requirements.
Overview, relevant standards, and technical data for Natural Gas and LPG.
Guidelines for air vent requirements based on natural flue and fan flue versions.
Details on fireplace opening, hearth, gas supply connection, and flue specifications.
Information on optional flue gather and installation of Dunbrik starter units.
Instructions on fitting glass canopies and their relation to air vent installations.
Details on available canopy options, standard (STD) and no-vent (NV), for different fire models.
Detailed instructions for installing the firebox and raised hearth for Slab 30 and 22.
Steps for connecting gas supply and fitting the mantle for Slab models.
Instructions for installing the firebox and raised hearth for Frame 30 and 22 models.
Steps for connecting gas supply and fitting the frame for Frame models.
Instructions for installing the firebox and raised hearth for Wall, Panorama, Vision, and H.I.W. models.
Steps for gas connection, mantle fitting, and specific H.I.W. version mantle installation.
Instructions for installing the firebox, IR sensor bracket, and battery position for Ledge models.
Steps for gas connection, fitting the surround, and fitting the raised hearth for Ledge models.
Instructions for installing the firebox, frame support bracket, and tensioning for Storm 22.
Steps for gas connection and fitting the frame for the Storm 22 model.
Instructions for removing locator strips, fitting the surround, and placing magnets for Geometry models.
Step-by-step guide for correctly placing the pebble ceramic pieces on the burner.
Step-by-step guide for correctly placing the driftwood and charcoal ceramic pieces.
Instructions for placing numbered outer ceramic clusters and loose outer pieces.
Instructions for placing the dish and small pebbles for the Dish Pebble version.
Instructions for placing the dish and driftwood pieces for the Dish Driftwood version.
Steps to follow for commissioning the fire before use, including gas and smoke tests.
Steps for servicing the fire, including cleaning burner ceramics and performing spillage tests.
To Next Page
